Catalytic Performance Research Articles

Construction of Heterostructured NiS/NiSe2 and their application in electrocatalytic water splitting

Development of non-precious metal electrocatalyst that can efficiently catalyze the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) simultaneously, is a great challenge. Herein, density functional theory (DFT) calculations are first conducted to explore the beneficial effect of NiSe2/NiS heterostructure on OER. Based on this, a series of nickel selenosulfides constructed by different amounts of NiS and NiSe2 are synthesized. Results indicate that Ni4–Se2–S2 with the NiS to NiSe2 ratio of 5.82/2.47 displays outstanding electrocatalytic activity for OER/HER, with overpotentials of 228 mV and 155 mV at 10 mA cm−2, respectively. Moreover, a two-electrode electrolyzer using Ni4–Se2–S2 as the anode and cathode exhibits a lower voltage than RuO2||Pt/C. Moderate ratio of NiS to NiSe2 achieves a balance between conductivity and surface area, which endows Ni4–Se2–S2 the best catalytic performances. Our results pave a way for the optimization of heterostructured catalysts.

Effect of Preparation Conditions of Nanocrystalline Pd/MgO Catalysts on Their Performance in Selective Hydrogenation of Acetylene

In the present work, an alkoxide sol-gel method was applied to prepare Pd/MgO catalysts. The sol-gel procedure was followed by supercritical drying (aerogels) or conventional drying (xerogels) in a furnace. These materials were compared with the impregnated samples. The Pd loading was 1 wt% in all the cases. The as-prepared catalysts were characterized by a set of physicochemical methods. Both the type of the Pd precursor and the preparation route were found to affect the porous structure of the materials as well as the dispersion of the palladium particles and their localization over the MgO support. Both the xerogel and incipient wetness impregnation methods lead to a narrower pore size distribution in comparison to the aerogel technique. The most dispersed particles with an average size of ∼ 2.0-2.2 nm were observed for the samples prepared by xerogel and impregnation methods. In the case of aerogel-prepared samples, metallic palladium particles possess bimodal distribution with average diameters of 4.3 and 8.4 nm. The best catalytic performance in acetylene hydrogenation to ethylene (50% acetylene conversion at 37°C with selectivity ∼60 %) was observed for the Pd/MgO catalyst prepared via the aerogel route using [Pd(NH3)4](NO3)2. Compared to other samples, this material is characterized by relatively weak metal-support interactions and the availability of active sites for reactants, which ensures the kinetic mode of the hydrogenation reaction (Ea = 74.9 kJ/mol).

Advanced Ru/Ti4O7 catalyst for Tolerating CO and H2S poisoning to hydrogen oxidation reaction

CO and H2S poisoning of Pt-based catalysts for hydrogen oxidation reaction (HOR) stands as one of the long-standing hindrances to the widespread commercialization of proton exchange membrane fuel cells. In this paper, a Ru/Ti4O7 catalyst is successfully synthesized by the microwave-thermal method. This Ru/Ti4O7 catalyst shows a much higher noble metal mass activity than those of commercial PtRu/C and conventional Ru/C catalysts. The performance of the Ru/Ti4O7 catalyst under the exist of CO or H2S shows insignificant current decay, which is far superior to commercial PtRu/C and Pt/C catalysts. In this Ru/Ti4O7 catalyst, the electron transfer between Ru and Ti to form d-p orbital hybridization is considered to be responsible for the favorable catalytic HOR performance and the corresponding CO and H2S tolerance. The interaction mechanism formed by electron transfer may open a promising way for the subsequent development of anti-poisoning catalysts for PEM fuel cell hydrogen oxidation reaction.

Highly Efficient Bimetallic Catalyst for the Synthesis of N-substituted Decahydroacridine-1,8-diones and Xanthene-1,8-diones: Evaluation of their Biological Activity

Background: Bimetallic catalysis plays a major role in boosting the catalytic performance of monometallic counterparts due to the synergetic effect. Method and Materials: In the present study, we have exploited ZrCl4:Mg(ClO4)2 as an efficient bimetallic catalyst for the synthesis of a few biologically relevant N-substituted decahydroacridine-1,8-diones and xanthene-1,8-diones under solvent-free conditions. The complete characterization data (XRD, SEM, BET, pH, TGA, and IR) of the bimetallic catalyst, ZrCl4: Mg(ClO4)2, are provided in the supporting information. Results: Among the compounds screened for anti-oxidant and anti-microbial activities, the acridine derivatives with chloro and fluoro substitutions (compounds 4b, 4c, 4d, and 4j) have exhibited potent activities when compared to other compounds. Among the xanthene derivatives screened for anti-oxidant activity, compounds 5c, 5i, and 5j with chloro and nitro derivatives exhibited potent antioxidant activity, and the rest all showed moderately potent activity. Conclusion: Among the compounds screened for antibacterial activity, compound 5j with chloro substitution showed potent activity, followed by compounds 5c, 5d, 5h, and 5i against Gram +ve bacteria, and compounds 5h, 5f, and 5g with N,N-dimethyl, methoxy and hydroxy substitutions have shown potent activity against Gram -ve bacteria.

Experimental and kinetic evaluation on cobalt Salen conjugated organic polymers for CO2 cycloaddition reactions and iodine vapor adsorption

The fixing reactions of carbon dioxide with epoxides will not only help to ameliorate the problem of global warming, but also facilitate the synthesis of cyclic carbonates that have a multitude of applications. Herein, a new sequence of Salen cobalt complexes adjusted with different counterions and interconnected with pyrene group were synthesized through Friedel–Crafts alkylation, which were served as conjugated organic polymers (SP-COPs) for taking advantage of catalytic CO2 fixation reactions and iodine adsorption. Further characterizations were carried out through FT-IR, UV, TGA, and SEM to comprehend the intact structure, thermal stability, morphology and other physical and chemical properties. All materials exhibited effective catalytic performance, and in particular, SP-COP-1 with co-catalyst of TBAI achieved 96.2 % conversion under ultra-mild conditions. The Ea was obtained to be 46.4 kJ·mol−1 by performing kinetic experiments at different temperatures by fitting the experimental data. The performance of iodine vapor adsorbed by these materials at ambient pressure of 75 °C reached 2.8 g·g−1, 2.2 g·g−1 and 2.6 g·g−1 respectively, and the adsorption process is describable in terms of pseudo-first-order and pseudo-second-order adsorption kinetics.

Effects of various pyrolysis temperatures on the physicochemical characteristics of crop straw-derived biochars and their application in tar reforming

As a by-product of the rapid pyrolysis of biomass, biochar not only plays an important role in the biomass conversion process but also holds significant potential value in the catalytic conversion field. This study aimed to evaluate the physicochemical properties changes of biochars at different pyrolysis temperatures and their potential application in tar reforming. Biochars derived from three feedstocks of maize straw (MS), rice husk (RH), and cotton straw (CS) were achieved by fast pyrolysis within a broad temperature range of 300~900 °C, respectively. The results showed that the pyrolysis temperature exerted a pronounced influence on the structural characteristics of biochar. With increasing temperature, the H/C and O/C ratios progressively decreased, accompanied by a significant reduction in oxygen-containing structures. In addition, elevated pyrolysis temperatures contributed favorably to the formation of the crystalline structure of biochar. Raman analysis unveiled a correlation between the fused aromatic ring system and H/C ratios, validating the aromatization progress of biochar. In the tar catalytic reforming process, the three representative biochars, under the effect of MS-600 (standing for MS biochar derived at 600 °C), RH-600, and CS-600 catalysts, exhibited outstanding catalytic performance with tar conversion efficiencies of 73.26%, 68.51%, and 71.43%, respectively. This study provided systematic support for the high-value use of biochar from crop straw.

Optimization of photocatalytic ceramic membrane filtration by response surface methodology: Effects of hydrodynamic conditions on organic fouling and removal efficiency

The effects of the operating conditions, including the applied pressure, feed organic concentration, and recirculation flowrate along the TiO2-coated ceramic membrane, on the normalized membrane permeability and organic removal efficiency were systematically investigated by operating a photocatalytic membrane reactor (PMR). Response surface methodology (RSM) was conducted to better understand the interactive effect of operational conditions as well as their individual and combined effects to control membrane performance. Our results showed that the applied pressure and feed organic concentration, as single parameter, affected the normalized membrane permeability and organic removal efficiency more dominantly than the recirculation flowrate. The polynomial performance equations generated by RSM successfully predicted the membrane performance of the PMR. The responses to the normalized membrane permeability and organic removal efficiency with respect to the operational conditions were less sensitive to any combination of operational conditions than to their individual impacts. The combined effects of the operating conditions were less pronounced in promoting the catalytic performance of organic contaminants on the TiO2 surface. Our RSM analysis based on experimental observations designed by Box–Behnken Design (BBD) suggested that 1.3 bar of applied pressure, 44 mg/L of feed organic dye concentration and 0.8 L/min as recirculation flowrate as optimum conditions achieved more than 98% of organic removal efficiency and less than 5% of decline in normalized membrane permeability. This research shows that the RSM provides effective tool to optimize operational conditions to determine fouling rate and organic removal in PMR.

A Study of ZSM-5 Molecular Sieve Shaping for an Innovative Cyclohexene Hydration Process

The development of the zeolite molecular sieves (ZSM-5) molding technique is essential for the cyclohexene hydration reaction distillation process in both industrial and research settings. The reactive distillation process can solve many of the drawbacks associated with the existing technique of manufacturing cyclohexanol via cyclohexene hydration, such as high catalyst digestibility, low conversion rate, and operational challenges. This study developed a series of molded ZSM-5 catalysts with various binder types and contents were constructed. The suggested pseudo-boehmite and hydroxypropyl methylcellulose were chosen as binders for extrusion molding of ZSM-5. The effects of binders on the strength reliability were investigated by strength tests and statistical analysis of the Weibull function. The effects of binders on the physical structure, acidity, and catalytic performance of ZSM-5 were investigated by X-ray diffraction, scanning electron microscopy, physical adsorption of N2, and desorption of NH3. The findings demonstrate that the addition of binder has no effect on ZSM-5's crystal structure. The experiment's results showed that the molded catalyst could be used for the hydration process with over 95% selectivity and a yield of 10.45% cyclohexanol. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Research Progress of Nickel Iron Bimetallic Series Electrocatalytic Materials

Hydrogen energy has become one of the recognized clean energy sources worldwide due to its advantages such as low cost, renewable energy, and green environmental protection. Electrolytic water is currently one of the most promising solutions for providing hydrogen fuel. Nickel iron bimetallic electrocatalysts have abundant sources, low cost, clean and pollution-free properties, and strong catalytic performance, This article mainly reviews the development and research of bimetallic nickel iron oxides and nickel iron alloys in recent years, and explores their synthesis methods, properties, and stability in depth.

Fine-Tuning Electron-Donor Capability in the Basic Anion of Poly(ionic liquid) Frameworks for Revolutionizing Catalytic Synthesis of Ethyl Methyl Carbonate with Both Ultrahigh Catalytic Activity and Selectivity.

Ethyl methyl carbonate (EMC) is a crucial solvent extensively utilized in lithium-ion battery electrolytes; the transesterification of dimethyl carbonate (DMC) with ethanol is a pivotal reaction for EMC production. However, this reaction faces challenges due to the trade-off between catalytic activity and selectivity from the basic catalysts. In this issue, we report an innovative strategy through fine-tuning the electron-donor capability of the basic phenolate anion ([PhO]) in a novel poly(ionic liquid) (PIL) framework, as synthesized via an alkylation reaction between 1,3,5-tris(bromomethyl)benzene, biphenyldiimidazole, and N,N'-carbonyldiimidazole (CDI) to trigger targeted basicity that can directionally catalyze the transesterification of DMC with ethanol, so as to achieve both ultrahigh catalytic activity and selectivity toward EMC. By varying the substituent groups with electron-withdrawing and electron-donating effects on the phenolate anion, the PILs show expected changes in the catalytic performance, following well with the trend of charge density on these substituted phenolate anions. The optimized catalyst [CPIL-CDI][MeOPhO], induced by p-methoxyphenolate anions, allows an extraordinary EMC yield of 72.19% and an EMC selectivity of 91.48% under mild conditions without any process intensifications, suppressing all of the reported catalysts reported to date. Outcomes and approaches shown in this work have the potential to expedite the systematic design of cations and anions within PILs for industrial-scale EMC production through environmentally friendly transesterification processes.

Synergistic Ni-W Dimer Sites Induced Stable Compressive Strain for Boosting the Performance of Pt as Electrocatalyst for the Oxygen Reduction Reaction.

Alloying Pt catalysts with transition metal elements is an effective pathway to enhance the performance of oxygen reduction reaction (ORR), but often accompanied with severe metal dissolution issue, resulting in poor stability of alloy catalysts. Here, instead of forming traditional alloy structure, we modify Pt surface with a novel Ni-W dimer structure by the atomic layer deposition (ALD) technique. The obtained NiW@PtC catalyst exhibits superior ORR performance both in liquid half-cell and practical fuel cell compared with initial Pt/C. It is discovered that strong synergistic Ni-W dimer structure arising from short atomic distance induced a stable compressive strain on the Pt surface, thus boosting Pt catalytic performance. This surface modification by synergistic dimer sites offers an effective strategy in tailoring Pt with excellent activity and stability, which provides a significant perspective in boosting the performance of commercial Pt catalyst modified with polymetallic atom sites.

Synergistic Ni−W Dimer Sites Induced Stable Compressive Strain for Boosting the Performance of Pt as Electrocatalyst for the Oxygen Reduction Reaction

AbstractAlloying Pt catalysts with transition metal elements is an effective pathway to enhance the performance of oxygen reduction reaction (ORR), but often accompanied with severe metal dissolution issue, resulting in poor stability of alloy catalysts. Here, instead of forming traditional alloy structure, we modify Pt surface with a novel Ni−W dimer structure by the atomic layer deposition (ALD) technique. The obtained NiW@PtC catalyst exhibits superior ORR performance both in liquid half‐cell and practical fuel cell compared with initial Pt/C. It is discovered that strong synergistic Ni−W dimer structure arising from short atomic distance induced a stable compressive strain on the Pt surface, thus boosting Pt catalytic performance. This surface modification by synergistic dimer sites offers an effective strategy in tailoring Pt with excellent activity and stability, which provides a significant perspective in boosting the performance of commercial Pt catalyst modified with polymetallic atom sites.

Crystal-Phase-Engineered High-Entropy Alloy Aerogels for Enhanced Ethylamine Electrosynthesis from Acetonitrile.

Crystal-phase engineering that promoting the rearrangement of active atoms to form new structural frameworks has achieved excellent result in the field of electrocatalysis and optimized the performance of various electrochemical reactions. Herein, for the first time, we found that the different components in metallic aerogels will affect the crystal-phase transformation, especially in high-entropy alloy aerogels (HEAAs), whose crystal-phase transformation during annealing is more difficult than medium-entropy alloy aerogels (MEAAs), but they still show better electrochemical performance. Specifically, PdPtCuCoNi HEAAs with the parent phase of face-centered cubic (FCC) PdCu possess excellent 89.24% of selectivity, 746.82mmol h-1 g-1 cat. of yield rate, and 90.75% of Faraday efficiency for ethylamine during acetonitrile reduction reaction (ARR), while maintaining stability under 50h of long-term testing and 10 consecutive electrolysis cycles. The structure-activity relationship indicates that crystal-phase regulation from amorphous state to FCC phase promotes the atomic rearrangement in HEAAs, thereby optimizing the electronic structure, and enhancing the adsorption strength of reaction intermediates, improving the catalytic performance. This study provides a new paradigm for developing novel ARR electrocatalysts, and also expands the potential of crystal-phase engineering in other application areas. This article is protected by copyright. All rights reserved.

Electron-Rich Ru Supported on N-Doped Coffee Biochar for Selective Reductive Amination of Furfural to Furfurylamine.

Highly selective synthesis of primary amines from renewable biomass has attracted increasing attention, but it still faces great challenges in chemical industry applications. In this study, an electron-rich Ru catalyst was constructed by doping N into coffee biochar using a one-pot carbonization method (Ru/NCB-600). Ru/NCB-600 showed high catalytic activity and yield for the reductive amination of furfural with green and cheap NH3 and H2. The excellent catalytic performance of Ru/NCB-600 was closely correlated to the formation of electron-rich Ruδ- species (Ruδ--Nxδ+), which endowed Ru/NCB-600 with an enhanced H2 adsorption and activation ability. Ru/NCB-600 showed a high formation rate of 95.6 gfurfurylamine·gRu-1·h-1 and a high yield of furfurylamine (98.6%) at 50 °C. Ru/NCB-600 can also be used for the reductive amination of various carbonyl compounds in good to excellent yield (95.4-99%). This study thus provides a potential pathway for the highly selective reductive amination of carbonyl compounds by regulating the electron density of Ru.

Variation in Catalytic Efficacies of a 2D pH-stable MOF by Altering Activation Methods.

Although it is well-known that the Lewis acidity of Metal-Organic Frameworks (MOFs) can effectively enhance their catalytic activity in organic transformations, access to these Lewis-acidic sites remains a key hurdle to widespread applications of Lewis-acidic catalysis by MOFs. Easy accessibility of strong Lewis acidic sites onto 2D MOFs by using proper activation methods can be a cornerstone in attaining desired catalytic performance. Herein, we report a new 2D chemically stable MOF, IITKGP-60, which displayed excellent framework robustness over a wide pH range (2-12). Benefiting from the abundant open metal sites (OMSs) and framework robustness, the catalytic activity of the developed material was explored in one-pot three-component Strecker reaction and Knoevenagel condensation reaction. Moreover, the developed catalyst is superior in catalyzing the reactions involving sterically hindered substrate (1-naphthaldehyde) with high turnover numbers. A comparative catalytic study was conducted using different activation methods (chloroform and methanol exchanged activated samples), highlighting the significant effect of activation methods on its catalytic performances. The sustainable synthetic pathway under solvent-free conditions for a broad scope of substrates using low catalyst loading and excellent recyclability made the developed pH-stable framework a promising heterogeneous catalyst.

Electronegative Phosphorus-Integrated Co2+ Active Sites for Enhanced Electrocatalytic Nitrogen Reduction.

In the quest for proficient electrocatalysts for ammonia's electrocatalytic nitrogen reduction, cobalt oxides, endowed with a rich d-electron reservoir, have emerged as frontrunners. Despite the previously evidenced prowess of CoO in this realm, its ammonia yield witnesses a pronounced decline as the reaction unfolds, a phenomenon linked to the electron attrition from its Co2+ active sites during electrocatalytic nitrogen reduction reaction (ENRR). To counteract this vulnerability, we harnessed electron-laden phosphorus (P) elements as dopants, aiming to recalibrate the electronic equilibrium of the pivotal Co active site, thereby bolstering both its catalytic performance and stability. Our empirical endeavors showcased the doped P-CoO's superior credentials: it delivered an impressive ammonia yield of 49.6 and, notably, a Faradaic efficiency (FE) of 9.6% at -0.2 V versus RHE, markedly eclipsing its undoped counterpart. Probing deeper, a suite of ex-situ techniques, complemented by rigorous theoretical evaluations, was deployed. This dual-pronged analysis unequivocally revealed CoO's propensity for an electron-driven valence metamorphosis to Co3+ post-ENRR. In stark contrast, P-CoO, fortified by P doping, exhibits a discernibly augmented ammonia yield. Crucially, P's intrinsic ability to staunch electron leakage from the active locus during ENRR ensures the preservation of the valence state, culminating in enhanced catalytic dynamism and fortitude. This investigation not only illuminates the intricacies of active site electronic modulation in ENRR but also charts a navigational beacon for further enhancements in this domain.

CuPd bimetallic nanoparticles supported magnetic ionic liquid-derived N-doped carbon as a highly efficient heterogeneous catalyst for the one-pot oxidative multicomponent reactions

BackgroundMulticomponent reactions often rely on aldehydes as the reactants, limiting their widespread use. To enhance the versatility and scope of these reactions, aldehydes can be replaced with alcohols. MethodsIn this study, nitrogen-doped magnetic carbon nanostructures modified with imidazolium-based ionic liquid (Fe3O4@NC-IL) were prepared. These nanostructures were synthesized by a one-pot hydrothermal carbonization method using ferric chloride in the presence of glucose, urea, epichlorohydrin and 1-methylimidazole as carbon source, nitrogen source, linker and ionic liquid, respectively. Then, CuPd bimetallic nanoparticles were immobilized on the synthesized nanostructures by a wet chemical reduction process. Significant findingsThe catalytic activity of the nanostructures was evaluated in the oxidation of alcohol under base-free conditions. The results indicate that the CuPd bimetallic catalyst exhibited better catalytic performance than both Cu and Pd monometallic catalysts, suggesting a synergistic effect between copper and palladium. Also, a non-ionic liquid-based catalyst was synthesized and used in the model reaction to study the effect of imidazolium ionic liquid species on the catalytic activity. The results showed that these species enhanced the catalytic activity. Finally, the catalytic activity of the synthesized structure was evaluated through a one-pot tandem oxidative synthesis of dihydropyrimidinones (Biginelli reaction) and dihydropyridines (Hantzsch reaction).

Theoretical and experimental investigations of vanadium pentoxide–based electrocatalysts for the hydrogen evolution reaction in alkaline media

AbstractA key approach towards better realization of intermittent renewable energy resources, namely, solar and wind, is green electrochemical hydrogen production from water electrolysis. In recent years, there have been increasing efforts aimed at developing noble metal-free electrocatalysts that are earth-abundant and electroactive towards hydrogen evolution reaction (HER) in alkaline electrolytes, wherein an initial water dissociation step is followed by a two-electron transfer cathodic reaction. Although relatively earth-abundant, vanadium-based electrocatalysts have been sparsely reported due to subpar electroactivity and kinetics towards water electrolysis in general and alkaline electrolysis in specific. Herein, we investigate the fine-tuning of orthorhombic V2O5-based electrocatalysts as candidates for HER through a scalable two-step sol–gel calcination procedure. Briefly, surface-induced anionic oxygen deficiencies and cationic dopants are synergistically studied experimentally and theoretically. To that end, first-principle facet-dependent density function theory (DFT) calculations were conducted and revealed that the coupling of certain dopants on V2O5 and co-induction of oxygen vacancies can enhance the catalytic HER performance by the creation of new electronic states near the Fermi level (EF), enhancing conductivity, and modulating surface binding of adsorbed protons, respectively. This was reflected experimentally through kinetically non-ideal alkaline electrochemical HER using Zn0.4V1.6O5 whereby − 194 mV of overpotential was required to attain − 10 mA/cm2 of current density, as opposed to pristine V2O5 which required 32% higher overpotential requirement at the same conditions. The disclosed work can be extended to other intrinsically sluggish transition metal (TM)–based oxides via the presented systematic tuning of surface and bulk microenvironment modulation. Graphical Abstract

Synthesis of PEI Grafted Poly (Ionic Liquid)s: Optimization and Kinetics Modeling of Effective CO2 Fixation Reactions

AbstractFixing the greenhouse gas CO2 through epoxide helps to mitigate worldwide ecological troubles. The applications of metal‐free and solvent‐free catalysts remain a challenge for CO2 catalytic conversion. In this work, an array of quaternary ammonium salts derived from polyethyleneimine with hydroxyl groups ([PEI‐GDMAB‐Cn]Br) were constructed by the reaction of branched PEI with a molecular weight of 10000 and glycidyl alkyl dimethylammonium bromide. A range of experiments were designed to demonstrate that [PEI‐GDMAB‐Cn]Br can be considered as a valid metal‐free and solvent‐free homogeneous catalyst for the CO2‐epoxide cycloaddition reaction. Among of [PEI‐GDMAB‐Cn]Br, [PEI‐GDMAB‐C18]Br catalyzed the model reaction of CO2 and epichlorohydrin under optimized reaction conditions (T=80 °C, 1.0 atm CO2, catalyst 1 mol%, ECH 15 mmol, 16 h) and the conversion achieved at 97.5 %. Moreover, the catalyst exhibited stable reusability and broad substrate applicability, which was used in the following cycle succinctly, because of self‐separated properties by temperature control. The [PEI‐GDMAB‐C18]Br catalyzed reaction process was detected as a pseudo‐first‐order reaction after kinetic studies and an Ea was calculated to be 50.65 kJ/mol. A combinatorial catalytic mechanism of hydrogen bonding and bromide ions is suggested to explain the remarkable catalytic performance of this bifunctional catalyst.

Furfural Acetalization with Ethanol over Hierarchical vs. Conventional Beta Zeolites

AbstractA set of hierarchical Beta zeolites was synthesized using concentrated reaction mixtures and compared to conventional materials with a similar composition. The obtained zeolite catalysts were investigated in acetalization of furfural with ethanol at room temperature yielding a commercially valuable fuel additive (furfural diethyl acetal). The highest yield of the desired product (91 %) was achieved over a zeolite catalyst possessing developed mesoporosity (Vmeso 0.75 cm3/g) and a high external surface area (280 m2/g). The concentration of accessible acid sites was found to be responsible for high catalytic performance of the tested zeolitic catalysts.